Leonardo, I have had good luck buying new and used Yaskawa servos from eBay. Jim
----- Original Message ----- From: Leonardo Marsaglia <leonardomarsagli...@gmail.com> To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Sent: Fri Apr 20 15:08:32 2012 Subject: [Emc-users] OT: Chinese servo motor Hello everybody, This is not a pure LinuxCNC question, but it's a question about servo motors, and I'm going to control them using LinuxCNC, and given the knowledge and experience on this list I think you could clear some of my doubts. I'm looking for cheap servo motors to control some positioning movements on a grinder, since the steppers are way too limited in their torque. So I was looking for chinese servo motors, (since my steppers and drives are from china and work very well), and I found this:http://www.alibaba.com/product-gs/466312062/130ST_M07725_2kw_industrial_motor.html I was wondering if any of you have experience with these kind of servos, and what do you think about it, because the prices are way too cheap. USD 265 for a 2kw servo motor and USD 290 for the driver. So I would be thanked if you can tell me your thoughts about this, and of course I'll be more thanked if you have any recomendation. Best regards! -- *Leonardo Marsaglia*. ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users This communication is for the use of the intended recipient only. It may contain information that is privileged and confidential. If you are not the intended recipient of this communication, the disclosure, copying, distribution or use hereof is prohibited. If you have received this communication in error, please advise me by return e-mail or by telephone and then delete it immediately. ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
