I think it works no matter what but it is smoother if you adjust it. I forget the RPM you run the stepper at then tune for smoothest sound and done.
John On 5/1/2012 7:21 AM, Viesturs Lācis wrote: > 2012/5/1 John Thornton<bjt...@gmail.com>: >> The G203v's that I use on my plasma cutter are smooth as silk and when >> you adjust the morphing pot you can really tell the difference when it >> is adjusted correctly. > Hmm, I put 6 G203v drives in the welding robot, but did not touch that > small tuning pot and the robot has been working just fine. Seems like > I will have to play with that next time I use Gecko drives... > > Viesturs > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
