Tom, I use ngcgui and just fill in the blanks for length of cut. I have one called x-trim that I just need speed and length and off I go.
Before ngcgui I just used a file called x-trim.ngc and edited the X and F. x-trim.ngc G20 (Units: Inches) G40 (Cancel Cutter Comp) G90 (Absolute Mode) G64 P0.005 (Continuous mode + path tolerance) G92 X0 Y0 o<touchoff> call [0.100] [0] [0.08] (Touchoff and start cutting) F70 G1 X6 M5 (Torch Off) G0 Z0.500 X0.000 G92.1 (Cancel offsets and set to zero) G0 Z0 M2 touchoff.ngc o<touchoff> sub (#1 pierce height, #2 pierce delay, #3 cut height) F10 G38.2 Z-1.75 (Probe to find the surface) G91 G1 Z0.070 (Raise up to Z0) G90 G92 Z0 (Set Z0) G1 Z#1 M3 S1 M66 P0 L1 Q5 (Wait for Arc OK from Torch) G4 P#2 (Pause for pierce delay) F25 Z#3 (goto cut height) o<touchoff> endsub M2 John On 5/14/2012 10:24 PM, Tom Easterday wrote: > Is there a simple conversational way in Linuxcnc (2.5) to cut a straight line > or a simple pattern? After cutting some parts on a large sheet with the > plasma machine today we wanted to cut a straight line starting from a touch > off point at a specific feed rate ending at a specific distance. This was to > cut off a remnant. We also wanted to cut a simple pattern that went from > touch off point to 24" in Y, then -5' in X, then 24" in Y and stop. We need > to set the feed rate and turn on the torch as well. Other than whip up a > quick g-code program (which works obviously), is there a utility that a more > novice person could use to do this? > > I see Sheetcam has a remnant function which is nice, but it would still be > useful in the event you didn't set that up in advance.... > > Tom > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users