I am using a Duemilanove board. The typical RepRap thermistor circuit and a HEXFET for the heater coil is on a prototyping shield. The firmware is called "teacup".
I got frustrated trying to get the serial port to work following the links on that webpage, so I decided to go down the PWM route. Alex On May 29, 2012 11:36 AM, "Joachim Franek" <joachim.fra...@pibf.de> wrote: > > Joachim > > On Tuesday 29 May 2012 18:22:00 Alex Hunt wrote: > > I mounted a "Wade" type extruder to my gantry router and have been 3D > > printing with LinuxCNC for about 6 months now. The extruder thermal > > control is managed by RepRap firmware on an Arduino. > > Which type of Arduino hardware do you use? > > see also: > http://reprap.org/wiki/EMCRepRap > > Joachim > > > > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
