Greetings guys; Trying to write the shaft extension carver, with an eye toward carving a new bearing boss for the crossfeed on my mini-lathe, to put a ball screw in it, I thought I'd get cute with the code and let it determine the maximum cut depth automatically. I had set that in the while statement to be 0.015" diameter, or 0.0075" in radius which this lathe can usually muster up the cajones to do. After it failed, I put some (debug, print vars) in it and found it seems to be prematurely exiting that first 'while' when the x_dec var is still around .020". Then it proceeds to completely skip the negation and debug statement after that endwhile and the next while cutting stanza, going straight to the m2.
This code so far only carves the first .506" to hold the existing crank handle, if it would carve it at all. I have moved a copy of it to my web page, under the Genes-os9-stf link, find a GCode subdir which has this gcode file X-extension.ngc in it. Can someone look and see where I blew it, please? Thanks. Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> is up! They will only cause the lower classes to move about needlessly. -- The Duke of Wellington, on early steam railroads. ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
