It set to 1000 setp ppmc.0.pwm.03.scale 1000 when you watch ppmc.0.pwm.03.value it changes from 1000 to -1000 and back and forth it goes when I set s 50 rpm then after some time ppmc.0.pwm.03.value goes to like 50 after some time but it still surges up and down and so does the number if left long enough ppmc.0.pwm.03.value goes to 0 or some really small number when the rpm is set lower than 100rpm but really never get stable above 100 rpm it just keeps surging up and down
-----Original Message----- From: andy pugh [mailto:bodge...@gmail.com] Sent: Tuesday, July 10, 2012 5:15 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Spindle hooked to dc servo amp On 10 July 2012 23:04, Kasey Matejcek <someo...@lkm.bz> wrote: > setp pid.3.maxoutput 1000 What is the pwm scale? If that is 0-1 and your PID is 0-1000 then you will have problems. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ---------------------------------------------------------------------------- -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
