On 29 July 2012 12:55, jeremy youngs <jcyoung...@gmail.com> wrote: > heres the tool table. I tried g10 l1 and it had the same error, i wrote > tool 5 in and saved the file . I dont understand why it sees all the other > tools?
I tried your tool.tbl in a sim, and get the same result. By removing the two trailing newlines from the file, saving then reloading from the Axis "file" menu I was able to get LinuxCNC to see the tool. Similarly, opening the tool-table editor, checking the file, writing the file, then reloading in Axis also works. I am not sure what the actual problem is, it seems like the file-parser might be less robust than one might hope. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
