Dear, I also started the thread with start command but it's not running (execution time = 0). Today I installed OS with LinuxCNC once again from LiveCD and I found out that latency test is running just once on first boot of the system and when I want to start it again it is not running anymore. Restarting the system does not help. I also try to install all available updates from build in ubuntu update manager but still nothing. I also tried to run some simulation configurations but without success. What could be the problem?
Best regards. On Sat, Aug 11, 2012 at 11:47 PM, andy pugh <[email protected]> wrote: > On 11 August 2012 13:25, Klemen Ozebek <[email protected]> wrote: > > > if I run classicladder standalone (without EMC) with following commands > it > > is not working - not refreshing: > ... > > Best Regards > > You need to start the threads. A simple "start" command will do it. > You can see if the threads are running with "show thread". 0 for the > execution time means the thread is not running. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
