On 29 August 2012 19:00, William Ratcliffe <[email protected]> wrote:
> loadrt hm2_pci config="firmware=hm2/5i20/2X7I65_72.BIT num_encoders=0 > num_pwmgens=0 num_stepgens=0 num_bspis=1" If this bit works it seems fair to assume that the firmware is OK. > [39776.467704] RTAPI: Task 1[eadbc800]: Fault with vec=14, signo=11 > ip=fc939017. > [39776.467708] RTAPI: This fault may not be recoverable without rebooting. > " Did you compile LinuxCNC? I assume so, as you mention the git repo. If it isn't too much trouble, could you follow the instructions in docs/rtfaults? That will at least narrow it down to a file and a program line. I wrote the driver, but don't have hardware to test with. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
