I also have a wood router. For me, I rarely if evver burn wood. When that happens either I am taking too large of a cut or my endmill is dull. Granted I am a hobby user and I am mostlly limited to 1/8 and 1/4 endmills and limiting DOC to the diameter of the endmill. I use the P64 with a small amount of P. I will typically cut air trying out different amounts of P to see what my speeds are on tight radi and hard corners.
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?GcodeInfo B On Fri, Sep 21, 2012 at 7:58 AM, John Thornton <[email protected]> wrote: > This is a good chapter on trajectory planning. > > http://linuxcnc.org/docs/html/common/User_Concepts.html > > and perhaps in addition to the above your acceleration might be too low > if your doing lots of small segments. > > John > > On 9/21/2012 6:32 AM, aaron moore wrote: > > Hi EMC > > I have a router running emc. Feed speed is good on straightlines, > however curves and circles are often slow and tend to burn the wood. Can > anyone explain how I can improve this. > > Thanks in advance > > Aaron > > > > Re-Form Furniture > > Aaron Moore > > Conileigh > > Skinners Bottom > > Redruth > > Cornwall > > TR16 5DY > > > > Tel: 01209 890084 > > Mob: 07805686188 > > Email:[email protected] > > Web: www.re-formfurniture.co.uk > > > ------------------------------------------------------------------------------ > > Got visibility? > > Most devs has no idea what their production app looks like. > > Find out how fast your code is with AppDynamics Lite. > > http://ad.doubleclick.net/clk;262219671;13503038;y? > > http://info.appdynamics.com/FreeJavaPerformanceDownload.html > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------------ > Got visibility? > Most devs has no idea what their production app looks like. > Find out how fast your code is with AppDynamics Lite. > http://ad.doubleclick.net/clk;262219671;13503038;y? > http://info.appdynamics.com/FreeJavaPerformanceDownload.html > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Got visibility? Most devs has no idea what their production app looks like. Find out how fast your code is with AppDynamics Lite. http://ad.doubleclick.net/clk;262219671;13503038;y? http://info.appdynamics.com/FreeJavaPerformanceDownload.html _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
