Igor Chudov wrote: > Humps are > > 1) Northwest corner, biggest hump, 1mm tall by 20mm wide > 2) Northeast corner, 0.5mm by 15mm wide > This has to be a program error. And, you should be able to EASILY see this on the Axis 3D display. Load the program, and then use the mouse buttons to tilt the display until you are looking flat at the XY plane. Zoom in and pan around the circle. The deviation on successive depth passes should show up very easily if it is a mm deep into the wall of the hole.
If it shows up on the preview, that gets backlash and the entire motion system off the hook. Jon ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
