I started experimenting with spindle control and have found some odd behavior. I added the example HAL content from section 2 of this page http://linuxcnc.org/docs/html/examples/spindle.html.
Got a error when I launched AXIS. Removed this line from the HAL file, which cleared the error: net spindle-cmd <= motion.spindle-speed-out (this was part of the HAL file Stepconf generated) After removing that line AXIS launched without incident, but when I enable the spindle (F9) and try adjusting the speed, ether by clicking the '+' / '-' buttons or pressing F11/F12 I only get ~1% & 100% PWM duty. If I enter an S code in the MDI command window I get full fidelity. Here is a link to a copy of my HAL file: https://www.dropbox.com/s/hgq3jqvmzajwi72/mini-mill.hal Any suggestions about what might be going on? I'm running 2.4.6. N.C. ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_nov _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
