> From: [email protected]
> To: [email protected]
> Date: Thu, 13 Dec 2012 21:07:40 +0100
> Subject: Re: [Emc-users] linear scales Heidenhain
>
>
> Dear Viesturs,
>
>
> Thanks for your reply. I m sure that these linear scales from Heidenhain in
> combination with a Heidenhain controller
> have a analog output. I also know that some of the Maho mills (from few year
> later) have a Philips 432 controller. Maybe
> the glass scales in combination with these controller are quadrture !!!!
> I will look for documantation but I m not sure i can help you . I have only a
> general service manual for the Maho mh 700c
>
> Regards
> j^p
>
>
> > From: [email protected]
> > Date: Thu, 13 Dec 2012 19:49:44 +0200
> > To: [email protected]
> > Subject: Re: [Emc-users] linear scales Heidenhain
> >
> > 2012/12/13 jean-paul coninx <[email protected]>:
> > >
> > >
> > > Dear emc users,
> > >
> > > I am an owner from a maho mhc 700c with a heidenhain tnc 135 controller.
> > > The controller doesn t work any more.
> > > I have read something about retrofitting. The most people use the Mesa
> > > cards in combination with Linuxcnc. For already a few years (no time like
> > > everyone) I a bought a Heidenhain EXE 935 convertor ( 3 axis from sinus
> > > wave to ttl signal) . The moment I bought these EXE 935 the Mesa 7i49
> > > didnt exist . In my opinion I have two options :
> > >
> > >
> > > Mesa 5i20 + Exe 935 + 7i33 and 2 x 7i37TA
> > > Mesa 5i20 + 7i49 + 2 x 737TA
> > >
> > > Which are the advantages or disadvantages to use the EXE 935 ?? I prefer
> > > without (the more I use the more can stop working)
> > >
> >
> > Are You sure that linear scales have analog output?
> > I was offered to do a retrofit of Maho MH400P mill, so few months ago
> > I spent few hours going through a thick file of documentation and I
> > remember that I saw something about quadrature TTL signal. I did not
> > pay that much attention to it, because I was looking for instructions
> > how to remove the cover from hydraulic pump. It needs to be fixed and
> > that is a prerequisite for me to get that job.
> >
> > Is there any chance that You have some useful information about
> > servicing hydraulic pump of Your mill? I suspect that they might be
> > pretty similar.
> >
> > --
> > Viesturs
> >
> > If you can't fix it, you don't own it.
> > http://www.ifixit.com/Manifesto
> >
> > ------------------------------------------------------------------------------
> > LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
> > Remotely access PCs and mobile devices and provide instant support
> > Improve your efficiency, and focus on delivering more value-add services
> > Discover what IT Professionals Know. Rescue delivers
> > http://p.sf.net/sfu/logmein_12329d2d
> > _______________________________________________
> > Emc-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/emc-users
>
> ------------------------------------------------------------------------------
> LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
> Remotely access PCs and mobile devices and provide instant support
> Improve your efficiency, and focus on delivering more value-add services
> Discover what IT Professionals Know. Rescue delivers
> http://p.sf.net/sfu/logmein_12329d2d
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
