Classicladder is the simple way to control your lube pump. You can view my configuration files here: http://www.gnipsel.com/shop/hardinge/hardinge.xhtml
John On 2/10/2013 10:52 PM, John Murphy wrote: > The lube pump in my BossV is over-oiling everything. If I leave it > powered, I come back to puddles of oil under every way after a long job. > Of course, I don't want to run long jobs without it. > > I have the way lube tied to the spindle on signal, so I figured there ought > to be a hal component that I can wedge between the 'spindle on' and the > digital output that drives the pump relay to say, power it every other > minute or three to reduce the volume of oil I'm getting. > > Any suggestions on a specific hal component? > ------------------------------------------------------------------------------ > Free Next-Gen Firewall Hardware Offer > Buy your Sophos next-gen firewall before the end March 2013 > and get the hardware for free! Learn more. > http://p.sf.net/sfu/sophos-d2d-feb > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
