Dave,
Actually I agree but I made a promise to myself with this retrofit
that I would do or buy whatever is necessary to ensure a proper working
reliable machine and arrive at that result with entirely bolt on parts
unless it is impossible to purchase a reasonably priced solution somewhere.
I think so far I have kept to that plan and do not wish to deviate
especially on something as important as the couplers that tie my new motors
to the ballscrews. LOL I just got off the phone with those guys at
helical whatever and they are gonna get back to me on the best solution for
my application as I described it to them. We shall see...peace
Pete
On Wednesday, February 13, 2013, dave <[email protected]> wrote:
> On Wed, 2013-02-13 at 16:24 -0500, Pete Matos wrote:
>> Agreed.....actually the fellow Lee in England was able to find exactly
the
>> right size but I suppose one could carefully bore it out to 22....Would
>> much prefer to just buy the right size LOL...
>>
>> On Wednesday, February 13, 2013, Billy Huddleston <[email protected]> wrote:
>> > Good thought, but, no combinations on that page that'll fit his needs.
>> 19mm to 22mm.. Couldn't find a combo..
>> >
>> > On 02/13/2013 04:01 PM, andy pugh wrote:
>> >> On 13 February 2013 20:48, Pete Matos <[email protected]> wrote:
>> >>> Looking at the board from Mesa I have here I think you guys are
>> right
>> >>> that I should have plenty of IO available and perhaps I should use
the
>> >>> individual home switches after all. I need also to source some nice
>> zero
>> >>> backlash 22mm to 19mm compression style couplers from a USA Source
>> >> I am in the UK and even I know that someone is going to say:
>> >> http://www.mcmaster.com/#metric-shaft-couplings/=lgqbwq
>> >>
>> >>
> Wow! Not the easiest to match. I've been known to make an adapter that
> converts the large shaft to something easier to match.
>
> http://heli-cal.com/cm/Home.html
>
> I've had good luck with these guys.
>
> Dave
>> >
>> >
>> > --
>> > Billy Huddleston Inner Vision
>> >
>> > *William Huddleston
>> > Inner Vision Development Corp*
>> > Office: 865.560.2752
>> > Fax: 865.560.2703
>> >
>> > http://www.ivdc.com
>> > *Development and Consulting... Simplified.*
>> >
>> > <http://www.facebook.com/pages/Inner-Vision-Development/120023721424> <
>> http://twitter.com/ivdc> <http://www.linkedin.com/in/ivdccorp>
>> >
>> >
>>
------------------------------------------------------------------------------
>> > Free Next-Gen Firewall Hardware Offer
>> > Buy your Sophos next-gen firewall before the end March 2013
>> > and get the hardware for free! Learn more.
>> > http://p.sf.net/sfu/sophos-d2d-feb
>> > _______________________________________________
>> > Emc-users mailing list
>> > [email protected]
>> > https://lists.sourceforge.net/lists/listinfo/emc-users
>> >
>>
------------------------------------------------------------------------------
>> Free Next-Gen Firewall Hardware Offer
>> Buy your Sophos next-gen firewall before the end March 2013
>> and get the hardware for free! Learn more.
>> http://p.sf.net/sfu/sophos-d2d-feb
>> _______________________________________________
>> Emc-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
>
>
------------------------------------------------------------------------------
> Free Next-Gen Firewall Hardware Offer
> Buy your Sophos next-gen firewall before the end March 2013
> and get the hardware for free! Learn more.
> http://p.sf.net/sfu/sophos-d2d-feb
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
