Are you creating it in VCarve Pro by using the Quick Engrave tool or the VCarve tool?
Regards, Marcus On 17 Apr 2013, at 12:14, Erik Friesen wrote: > I am routing some lettering on some small plastic buttons with a .020 ball > nose feeding at 15 ipm. I am using vcarve pro to create the lettering, > using Norm West 1L, or a single line font. I am using create profile, on, > to route the line, and doing two passes, one conventional, one climb, in an > attempt to minimize the plastic from leaving a curled edge on the cut. It > isn't working well enough. Really, I need to be cutting this as a vector > that is .001" wide, and routing it all conventional, as I think this would > fix the edge problem. Not sure how to get there with Vcarve pro though. > Any other suggestions out there? > ------------------------------------------------------------------------------ > Precog is a next-generation analytics platform capable of advanced > analytics on semi-structured data. The platform includes APIs for building > apps and a phenomenal toolset for data science. Developers can use > our toolset for easy data analysis & visualization. Get a free account! > http://www2.precog.com/precogplatform/slashdotnewsletter > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
