Gregg Eshelman wrote: > 750 Mhz Slot A Athlon <http://www.cpu-world.com/CPUs/K7/AMD-Athlon 750 - > AMD-K7750MTR52B A.html> > AOpen AK72 motherboard http://www.motherboard.cz/mb/aopen/ak72.htm > 768 meg PC133 SDRAM and a nVidia 5200 AGP card with 128 meg > > Is that good enough to run LinuxCNC for a small 2 axis gantry? > > I ran a 700 on a two axis setup with 8.04 and EMC2.3.4 and it took forever it seemed to bring up Gedit and screen updates were very slow.
Faster hardware is cheap now. 2 Ghz will run step/direction servos fine. Ed. ------------------------------------------------------------------------------ Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
