On Sat, 11 May 2013 23:09:38 -0700 (PDT), you wrote: >--- On Sat, 5/11/13, Gene Heskett <[email protected]> wrote: > >> Does anyone make a decent 4 jaw, about 5" in diameter that >> will fit the >> spindle flange of a mini-lathe for < $250? >> Most of the chuck peddlers on >> the net don't brag about what machines their product might >> fit. > >Nope. The only chucks made to directly fit the 7x Chinese lathe's spindles are >3". > >Here's a 5" 4 jaw with 7x lathe adapter. >http://www.littlemachineshop.com/products/product_view.php?ProductID=2346&category= > >Dunno why nobody makes a 4" or 5" direct bolt on chuck for them. There'd be a >large market for those.
Readily available over here http://www.arceurotrade.co.uk/Catalogue/Machines-Accessories/Lathes/Model-C3-Mini-Lathe/C3-Super-C3-Mini-Lathe-Accessories/C3-Super-C3-Headstock-Accessories 100mm = 4" (near enough ;) and also from several other dealers. Steve Blackmore -- ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
