Gregg; The Emco Compact 5 head used to have a table like this for doing as you say. (take head off of lathe and put it on an x/y table)
The colour looks like it's from Proxxon; (Proxon??) The issue with these Emco/Unimat heads is the lack of Z depth setting, etc. On Fri, May 31, 2013 at 5:14 AM, Gregg Eshelman <[email protected]> wrote: > Is this an X-Y mill base for a Unimat mill column? Would make a much nicer > mill than mounting the headstock on the column over the lathe bed. > > http://www.PartsByEMC.com/pub/unimat > > The table is 10-5/8" long. > > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite > It's a free troubleshooting tool designed for production > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://p.sf.net/sfu/appdyn_d2d_ap2 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite It's a free troubleshooting tool designed for production Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
