I use an Automation Direct GS2 VFD on my Series 1 BP. LinuxCNC has a component to control the GS2 via modbus.
JT On 6/18/2013 12:39 AM, Don Stanley wrote: > 1- Has anyone used a VFD to control the spindle speed via the G code? > > 2- Does anyone know a source for the lubriplate #107 recommended on the > units service placard? Or an compatible alternative? > > Thanks > Don > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users