Hi there, I am currently constructing a CNC box (well, I've been at it for over a year now) which is in the final stages of completion.
The box contains an Intel D525MW mobo, a SoundLogic "combo" breakout board, a PMDX-135-20 power board and four Gecko 203V drives. I recently got a 4-axis pendant (ISSMM1468) and am wanting to install it. The D525MW only has one lpt port, and one PCI slot. The best bet would seem to be to install a port-remappable twin parport PCI card of some sort so that I can run both the BoB and the pendant off the PCI bus. So far I have found three options: 1. Mesa 5126 "superport"; 2. This twin port item here<http://oceancontrols.com.au/COV-301.html> which is OOS and possibly unavailable; 3. This single port card here <http://www.sunix.com/sppd.php?cid=1&kid=16&gid=63&pid=1026> which Sunix claim is remappable - but only under DOS(!). Has anyone go any suggestions for a twin paraport remappable lpt card that will be remappable under Ubuntu *and* is available - and works well? The Mesa card seems to be the best fit but I'm uncertain what I should use between it and the pendant. Your sincerely, Alex. ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
