Good Day All, The gear box has 6 magnetic clutches in the gearboxand 2 magnetic clutches in the headstock ( high and low range)The gear changes only take place,when there is no load.I have the truth tables to select the magnetic clutches required for each spindle speed . Cheers john
> From: [email protected] > Date: Thu, 27 Jun 2013 12:18:58 +0100 > To: [email protected] > Subject: Re: [Emc-users] 16 speed gear change > > On 27 June 2013 02:04, john mcintyre <[email protected]> wrote: > > > I have a mazak M3 NC lathe,that I hope to convert > > to linux cnc control, and need some information or direction to enable the > > 16 > > speed gear change to operate under linux. > > Is the gearchange the only speed control, or is there a variable > frequency drive too? > > If it is the only speed control then it is relatively easy to choose a > gear on every change of S-number. If there is a vfd, and you intend to > use constant-surface speed then the choice is a little more > interesting. > > Does the gearbox change under power? > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
