there is no point in using this patch anymore - it has been superseded by the remapping capabilities
so yes, install master, try the configs/sim/remap/racktoolchange example, and go from there -m Am 17.07.2013 um 12:19 schrieb propcoder <[email protected]>: > I got this configuration, but it does not start as is, throwing an error > that there is no such file "core_sim.hal". > > It started after I changed the line #175 > HALFILE = ../../core_sim.hal > to > HALFILE = ../../core_sim_test.hal > > > But the tool change is made in one place momentarily. > > Do I have to build and install master branch development version? > > Marius > > On 07/17/2013 10:45 AM, Sebastian Kuzminsky wrote: >> I dont know anything about that patch, sorry. >> >> I think your best bet to support a rack toolchanger today would be to >> use the master branch and use g-code remapping. >> >> http://linuxcnc.org/docs/devel/html/remap/structure.html >> >> There's a sample config that simulates a rack toolchanger using this >> method, look in sim/remap in the config picker. > > > ------------------------------------------------------------------------------ > See everything from the browser to the database with AppDynamics > Get end-to-end visibility with application monitoring from AppDynamics > Isolate bottlenecks and diagnose root cause in seconds. > Start your free trial of AppDynamics Pro today! > http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
