On Thu, 8 Aug 2013, Marius Liebenberg wrote: > Date: Thu, 08 Aug 2013 18:08:16 +0200 > From: Marius Liebenberg <[email protected]> > Reply-To: "Enhanced Machine Controller (EMC)" > <[email protected]> > To: [email protected] > Subject: [Emc-users] Driving a stepper with a 7i37 > > I am trying to drive a stepper with a 5i23 and a 7i37. I set a stepgen > up to clock through some outputs on the 7i37 but I am not getting much > joy. It would seem that I cannot get the clock rate through the IO. > Has anyone done this before?
The 7I37 outputs are designed for high current (1A) isolated I/O, not high speed switching so its outputs are not suited for use with higher speed signals like step/dir above a few KHz. > > -- > Regards / Groete > > Marius D. Liebenberg > MasterCut cc > Cel: +27 82 698 3251 > Tel: +27 12 743 6064 > Fax: +27 86 551 8029 > Skype: marius_d.liebenberg > > > > --- > avast! Antivirus: Outbound message clean. > Virus Database (VPS): 130808-0, 2013/08/08 > Tested on: 2013/08/08 06:08:19 PM > avast! - copyright (c) 1988-2013 AVAST Software. > http://www.avast.com > > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
