Can't find any info on the main supply output voltage. There's a smaller one that's 24 volts and the wiring diagrams have references to +- 15 volts and the 24 volts, but for anything coming from the big transformer and capacitor, notations of voltage are conspicuously absent.
The existing servo amps are Fenner SDF1525-12 I've found some things on the web where those have been used with modern control hardware. Could be that finding just one of those will cost less than three new(er) ones and having to change the power supply too. Can't find any data on the Fenner boards either. This is just like trying to find info on pre-WWW computer parts, only worse. -------------------------------------------- On Mon, 8/12/13, andy pugh <[email protected]> wrote: Subject: Re: [Emc-users] Will these servo amps work with my motors? To: "Enhanced Machine Controller (EMC)" <[email protected]> Date: Monday, August 12, 2013, 3:28 PM On 12 August 2013 22:13, Gregg Eshelman <[email protected]> wrote: > http://www.ebay.com/itm/330824325707 > Volts 142 Do you know what voltage your motor PSU is outputting? Those drives are only good to 80V. ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
