Very nice John.. Dave Cole
On 8/13/2013 9:32 AM, John Thornton wrote: > I know most of you guys on the mailing list don't visit the forum so > here is a link to a G code generator for drilling and tapping holes on a > mill. I wrote this mainly because we don't have a tapping cycle and if I > forgot the pre-position move then you get a really neat show as your tap > traverses from where it is to the bottom of the hole. Anyone ever seen a > tapped slot? > > This saves me time when I need to tap some holes in a part and helps > prevent errors. > > http://linuxcnc.org/index.php/english/forum/31-cad-cam/26859-mill-tapping-g-code-generator > > JT > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with<2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
