Yes. My non-cape cape is a bunch of wires connecting to a controller I already had, in this case the RAMPS board that was purchased for my printer.
On Fri, Aug 16, 2013 at 5:41 AM, andy pugh <[email protected]> wrote: > On 16 August 2013 11:11, Andrew <[email protected]> wrote: > > What is the encoder pulse rate? > > About 10kHz. > > I suspect that an Arduino with interrupt-driven encoder counters might > be a good solution. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
