On 3 January 2014 17:31, Len Shelton <l...@probotix.com> wrote: > >> Simply give the same homing sequence number to each side. > > This wouldn't work unless you actually assigned a separate joint to each > motor and programmed your g-code accordingly. It needs to be simpler > than that.
It is simpler than that. Yes you have a separate joint for each motor. But they are both driven by the same _axis_ letter. You need a kinematics that can handle that. There are sample configs that do exactly this and that ship with LinuxCNC. Have a look at the "gantry" config in the samples. (Unhook the parport from your real machine and you can probably just run it, in fact) -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
