Joshia As far as I know the settings in the INI file is in IN/SEC or MM/SEC. Just check for yourself in the Manual to be sure.
On 2014-01-06 07:01, Josiah Morgan wrote: > can anyone explain what this is? > I have a stepper that should be able to operate at 1000 in/min but linuxcnc > won't let me enter a value higher than 31.25 for the STEPGEN_MAX_VEL. even > with STEPGEN_MAX_VEL at 31.25, it will still let me drive the axis much > faster than that, so I have to wonder what this value even does and how I > can determine what this value needs to be. > > TYPE = LINEAR > MAX_VELOCITY = 1000.0 > MAX_ACCELERATION = 500.0 > # Set Stepgen max 20% higher than the axis > STEPGEN_MAX_VEL = 31.25 ??!!?? > STEPGEN_MAX_ACC = 300 ??!!?? > > thanks again for all the help. > -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 ------------------------------------------------------------------------------ Rapidly troubleshoot problems before they affect your business. Most IT organizations don't have a clear picture of how application performance affects their revenue. With AppDynamics, you get 100% visibility into your Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro! http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
