hal: http://pastebin.com/cBXe7f5w ini: http://pastebin.com/m8nANyLM
using linuxcnc 2.5.0 (the livecd install) I will try halcmd show as you suggest, thanks ! On 2/9/14 9:55 PM, emc-users-requ...@lists.sourceforge.net wrote: >> >On 2/9/14 5:25 PM, bruno wrote: >>> > > >>> > >This is a stepper system, trivkins, 3 axis mill. >>> > >I kind of assumed that the tuning in pncconf is using the >>> > >configuration that it will write, it's not very useful if one tunes >>> > >things but then the parameters to use are different... > can you post your hal and INI files somewhere? > > Chris M ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
