John I did a tapping process with spot, drill, chamfer and tap. When I generated the Gcode it gave me an error that said the counter bore depth was null or zero. I pushed the chamfer depth button again and the error was gone. It only happened the once and I cannot recreate the error now.//I am wondering now if I maybe did not calculate the depth of the chamfer but the error said counter bore
On 2014-02-20 19:18, John Thornton wrote: > I can't follow what you did to get the error, can you reproduce it? > > JT > > On 2/20/2014 8:34 AM, Marius Liebenberg wrote: >> I saw that but you where quicker on the draw:) >> If you did not choose counter bore it would give a null value error. If >> you did the calculation on the bore tab it would go away. Was it that one? >> On 2014-02-20 16:22, John Thornton wrote: >>> Give me a moment, I just spotted an error with the counterbore... >>> >>> JT >>> >>> On 2/20/2014 7:59 AM, Marius Liebenberg wrote: >>>> Never mind I'll just use the Linux box. It work very well on that. >>>> Thanks John >>>> >>>> On 2014-02-20 15:49, Marius Liebenberg wrote: >>>>> This one is on Windoze >>>>> >>>>> On 2014-02-20 15:44, John Thornton wrote: >>>>>> I'm on 10.04 and Python version is 2.6.5. >>>>>> >>>>>> Run from a terminal and let me know the error msg. Dunno if I can fix it >>>>>> or not... >>>>>> >>>>>> JT >>>>>> >>>>>> On 2/20/2014 7:32 AM, Marius Liebenberg wrote: >>>>>>> Hi John >>>>>>> I had to rebuild my laptop so now I am on Python 3.3 and there seem to >>>>>>> be issues. What is the version that I should use rather? >>>>>>> >>>>>>> On 2014-02-20 14:59, John Thornton wrote: >>>>>>>> Hey Gene and anyone else, >>>>>>>> >>>>>>>> I added counterbore to my mill G code generator in version 1.6.0. >>>>>>>> >>>>>>>> http://gnipsel.com/files/g-code-generator/ >>>>>>>> >>>>>>>> Any feed back is appreciated. >>>>>>>> >>>>>>>> JT >>>>>>>> >>>>>>>> ------------------------------------------------------------------------------ >>>>>>>> Managing the Performance of Cloud-Based Applications >>>>>>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>>>>>> Read the Whitepaper. >>>>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk >>>>>>>> _______________________________________________ >>>>>>>> Emc-users mailing list >>>>>>>> [email protected] >>>>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>>>> >>>>>> ------------------------------------------------------------------------------ >>>>>> Managing the Performance of Cloud-Based Applications >>>>>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>>>>> Read the Whitepaper. >>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk >>>>>> _______________________________________________ >>>>>> Emc-users mailing list >>>>>> [email protected] >>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>>>> >>> ------------------------------------------------------------------------------ >>> Managing the Performance of Cloud-Based Applications >>> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >>> Read the Whitepaper. >>> http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
