Make sure you have hyperthreading turned off if that is an option in the bios.
Dave On 3/9/2014 1:08 AM, Bill wrote: > Thanks Gene > > > > > Thanks Gene > > (Don't you sleep?) > > Bill > -------Original Message------- > > From: Gene Heskett > Date: 03/09/14 16:02:25 > To: [email protected] > Subject: Re: [Emc-users] Emailing: latency-9-3-12 > > On Sunday 09 March 2014 00:46:06 Bill did opine: > >> Hi everyone >> >> I ran the latency test through the file system and got the atached >> results. >> >> Any idea where to look for the blips. >> >> Bill > > I think the keyword there is SMP, and I believe its a thing you can shut > off in the bios. There is a discussion about it in the wiki I believe. > > If not, then surely one of the other kind folks here can guide you I think. > It is a commonly encountered problem with some boards. > > Without those blips, it still looks a tad shaky, but if those are fixed by > a bios setting, you should be able to use it to move the machine as fast as > those motors can go. And I should note that a higher load has been known > to help stabilize these timing errors too. Running a copy or two of > glxgears has been reported to help get a larger, but more consistent lag > with smaller overall timing deviations. And that is what counts. > > Cheers, Gene > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author) > Genes Web page <http://geneslinuxbox.net:6309/gene> > > NOTICE: Will pay 100 USD for an HP-4815A defective but > complete probe assembly. > > > ----------------------------------------------------------------------------- > > Subversion Kills Productivity. Get off Subversion & Make the Move to > Perforce. > With Perforce, you get hassle-free workflows. Merge that actually works. > Faster operations. Version large binaries. Built-in WAN optimization and > the > freedom to use Git, Perforce or both. Make the move to Perforce. > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ > Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. > With Perforce, you get hassle-free workflows. Merge that actually works. > Faster operations. Version large binaries. Built-in WAN optimization and the > freedom to use Git, Perforce or both. Make the move to Perforce. > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
