Am 01.04.2014 um 22:27 schrieb Billy Huddleston <bi...@ivdc.com>: > I don't have configs/sim/axis/python_demo/axis-iocontrolv2-demo.ini or even > configs/sim/axis/python_demo and I'm running the latest master...
master as of now: http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=blob;f=configs/sim/axis/python_demo/axis-iocontrolv2-demo.ini;h=f98c6ba92cdc62e4ce4b79d0510fa2d65379a84b;hb=1bb1c457f75a0196734e0c47942938f6acca65ac obviously there is a major reshuffling going on for configs - I have no idea either why this landed under python_demo maybe Dewey could give some rationale for the current reorganisation? - Michael > > On 04/01/2014 04:20 PM, Michael Haberler wrote: >> Am 01.04.2014 um 22:11 schrieb andy pugh <bodge...@gmail.com>: >> >>> On 1 April 2014 21:00, Billy Huddleston <bi...@ivdc.com> wrote: >>>> Ah. Okay.. So that's something new then... >>> I don't know if it is new, default, or abandoned. The INI config docs >>> for both 2.5 and Master make no mention of it. >>> >>> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ToolchangerProtocolProposal >>> says that you select it with some entries in [EMCIO] >> I wrote this, and at the time I hoped we get rid of the arcane architecture >> where iocontrol is actually required soon, so I decided not to extend its >> life by documenting it >> >> in hindsight that was clearly unrealistic >> >> there are some notes here: >> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ToolchangerProtocolProposal >> there is a demo config >> configs/sim/axis/python_demo/axis-iocontrolv2-demo.ini which might be useful >> to understand what it does >> >> if somebody could write up a man page, I would really apprecuiate it, and >> review >> >> (no idea why this has been moved to python_demo) >> >> - Michael >> >> >> >> >>> -- >>> atp >>> If you can't fix it, you don't own it. >>> http://www.ifixit.com/Manifesto >>> >>> ------------------------------------------------------------------------------ >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > -- > Billy Huddleston Inner Vision > > *William Huddleston > Inner Vision Development Corp* > Office: 865.560.2752 > Fax: 865.560.2703 > > http://www.ivdc.com > *Development and Consulting... Simplified.* > > <http://www.facebook.com/pages/Inner-Vision-Development/120023721424> > <http://twitter.com/ivdc> <http://www.linkedin.com/in/ivdccorp> > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
