Il 09/04/2014 09:19 Marcus Bowman t ha scritto: > This is interesting. > I can't see the documentation on the NURBS commands, though. The link from > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?NURBS > opens but contains no content. > I am wondering about the definition and the actual functioning of the command > parameters P and L.
The command parameter are explained in: http://www.linuxcnc.org/docs/2.5/html/gcode/gcode.html#sec:G5_2-G5_3-NURBs However, i am pleased to inform you that i am developing a new control for the processing of the NURBS through the working up of our preceding job on the implementation of the NURBS in LinuxCNC. In particular, we managed to develop the command G6.2 which takes as input the same parameters command of NURBS interpolation accepted by FANUC Numerical Controls. http://ftp.laufer.su/4/fanuc/manufacturer/a/A-79985E_01_050425.pdf This implementation has been tested within a BeagleBone Black http://www.youtube.com/watch?v=BFiAHCX2VVk -- From: Prof. Ernesto Lo Valvo Dipartimento di Ingegneria Chimica, Gestionale, Informatica e Meccanica Universita' di Palermo Viale delle Scienze 90128 Palermo (Italy) ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
