Any thoughts on setting up a vfd for one of these spindles? http://www.automationdirect.com/adc/Shopping/Catalog/Drives/GS2_(115_-z-_230_-z-_460_-z-_575_VAC_V-z-Hz_Control)/GS2_Drive_Units_(115_-z-_230_-z-_460_-z-_575_VAC)/GS2-22P0
http://ugracnc.com/WATER-COOLED-SPINDLES/GMT-Water-Cooled-CNC-Spindle-0.75-kW-220V-R.html Not realizing the implications, I tried to run this out of the box... Maybe ok, but... Anyway, there isn't much info about the best voltage/hz ratio, other than some chinese datasheet that comes with the spindle. There is some reference to a 5Hz/10V, which doesn't make sense to me. It's really a stab at guessing what this motor wants, thought I'd try the list. ------------------------------------------------------------------------------ Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM now http://p.sf.net/sfu/perforce _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users