On Sunday 15 June 2014 21:42:50 Jon Elson did opine
And Gene did reply:
> On 06/15/2014 05:16 PM, Gene Heskett wrote:
> > Yup. good idea.  I looked around for some mini cable chain, something
> > I could hide inside the tables screw channels, but the smallest I
> > could find was still about 2x what it would take.  I'll probably
> > wind up fixing it to the ends of the tables & just let it swing on
> > its way up the post, and thence to the electronics on a shelf in the
> > "attic".  Motor cables have been hanging down from there for several
> > years & they don't seem to have minded.
> 
> Something I bought for another project and never used was
> some steel
> clock spring material.  Basically just a thin steel band,
> very similar to a
> feeler gauge, but you can get it in several foot lengths.  I
> planned to
> cable tie some cables and optical fibers to the band.  You
> could make a very
> tiny cable chain with this stuff.  Or, you can get this
> nylon cable wrap and
> just wrap the cable to protect it from pinching and sharp
> bending.
> 
> Jon

The corrugated split jacket stuff? Or the white spiral wrap.  If the shack 
has some of either, that does have an appeal.  Advance Auto could have 
that too.

I'll check on it tomorrow.  Thanks Jon.

Cheers, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>
US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS

------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to