On 16 June 2014 17:37, chris <[email protected]> wrote: > My question on limit-switch is, that i want to use it too as a probe > test, so i can tune my stepper-motors a bit.
I am a bit puzzled about what you are trying to do here. Is it the case that you have run out of inputs and want to share an input between probe and limit switches? This could be done with some logic in HAL, using the "and2" HAL component to direct the input pin to the required logical destination. I thought that this could be done using the new motion.motion-type pin to discriminate between probing and anything else, but I an now not so sure, as the commit description: http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=commit;h=a532de00059a4b8302382c8645b77a9c25cd0db2 Doesn't entirely agree with the docs: http://www.linuxcnc.org/docs/devel/html/man/man9/motion.9.html -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. Leverages Graph Analysis for Fast Processing & Easy Data Exploration http://p.sf.net/sfu/hpccsystems _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
