On Friday 11 July 2014 16:26:37 a k did opine And Gene did reply: > Hi > in hal_meter a lot thing, i need to know which one to check. > > i did > hal-meter>signals>home switch> False > > only x axis home switch change it to True.
I suspect you are not showing an exact copy, that switch, if you have them wired separately, should have a label home switch x or y or z. It is very important that you copy us exactly what you see on screen, including the menu paths. > ////////////////////////////////// > in > hal_meter>Parameter>hm2_5i20.io_ error was the space between io_ and error there? Now, I am in the middle of making a 5i25 move my small lathe so I am at the limit of what I can do here. But I note that when linuxcnc is shut down, every tally led on my C1G BOB goes to full brightness. If the spindle worked, it would be turning the motor wide open, somewhere in the 15,000 revs range at the motor shaft. My steppers are moving, but very slowly, max 99mm a minute, and with VERY leisurely accelerate/decelerate. This was "first light" so to speak. The step pulses are so narrow I have to put me in the dark to see a very faint glow from the tally leds. And both stepgens are running the motors reverse of the correct direction. But I have not turned on my Hitachi 100mhz dual trace scope to see whats going on yet. Some of these fixes will be fairly simple I believe. But its about 90F in the shop, I'm 79 and quite well done in this heat so for me it can wait. > i can not read that but it error > ////////////////////////////// > i think that this down load CD is bad and i can not "fix" it. > i need get good down load where all witch work like it was with emc2 > --2.2.4. > ///////////////// > ---- I'm running the latest 2.5.4---- i think my is 2.5 Did you use synaptic to install it, using this line (just add it to the bottom of the list) in your /etc/sources.list: deb http://buildbot.linuxcnc.org lucid v2.5_branch-rt If its not in that list, you will not get automatic updates. Both update-manager and synaptic share this list. You have to sudo gedit /etc/apt/sources.list to add that line, and then sudo update-manager to update to the last build or sudo synaptic to un-install/re-install > On Fri, Jul 11, 2014 at 6:47 AM, Stuart Stevenson <[email protected]> wrote: > > Aram, > > > > The description "working good and then not working" is not very > > > > informative. You need to describe what happens as clear and complete > > as you possibly can. > > > > Do NOT leave out any details. > > > > Tell us every button push and what happens after every button push. > > Tell us everything you see and do. It is almost impossible to send > > too much information when you request help. > > > > Then when someone answers you and/or asks you a question you MUST > > answer their questions and respond to their suggestions and > > thoughts. > > > > Don't leave out ANY details as this problem is caused by a minor > > detail that is probably something you have done (or maybe not done). > > > > When someone responds to your request for help you need to then > > become a helper to the person responding to your request. > > > > Pay close attention to what they say or suggest. Do what they want > > you to do and then respond with answers that only relate to the > > questions or suggestions they sent. > > > > thanks > > Stuart > > > > --------------------------------------------------------------------- > > --------- Open source business process management suite built on Java > > and Eclipse Turn processes into business applications with Bonita > > BPM Community Edition Quickly connect people, data, and systems into > > organized workflows Winner of BOSSIE, CODIE, OW2 and Gartner awards > > http://p.sf.net/sfu/Bonitasoft > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > ----------------------------------------------------------------------- > ------- _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
