http://pastebin.com/V29PaJrC
On Thu, Jul 17, 2014 at 12:09 PM, Philipp Burch <[email protected]> wrote: > Strange. Please try the following: > > 1. Uncomment the code in HAL, so that you can start LinuxCNC. > 2. While it is running (you don't need to load a file or move the axes > or anything) fire up a terminal (usually Ctrl+Shift+T) and paste the > following command (without the $ at the beginning): > > $ halcmd list pin | sed 's/ /\n/g' > halpins.txt > > 3. Hit return to execute the command. It is normal if you do not see > anything happening. > 4. The current directory (most likely /home/username/) now contains a > file called 'halpins.txt'. Throw this on pastebin and post the link here. > > Explanation: The command reads all available pins from the HAL > environment and stores the list in the file halpins.txt in the current > directory. The sed magic is just there to replace the spaces by > newlines, so we get a more readable list. The created file should look > something like this: > > axis.0.active > axis.0.amp-enable-out > axis.0.amp-fault-in > axis.0.backlash-corr > axis.0.backlash-filt > axis.0.backlash-vel > axis.0.coarse-pos-cmd > axis.0.error > ... > > The list should be quite lengthy, it generates over 500 lines when > running the axis simulation example. > > Regards, > Philipp > > On 17.07.2014 20:43, a k wrote: > > i use > > > > > > > >> # Read home switch inputs from I/O card. > > net x-home-sw <= hm2_5i20.0.gpio.026.in > > net y-home-sw <= hm2_5i20.0.gpio.030.in > > net z-home-sw <= hm2_5i20.0.gpio.034.in > > > > and this > > > > # Connect home switch nets to motion. > > net x-home-sw => axis.0.home-sw-in > > net y-home-sw => axis.1.home-sw-in > > net z-home-sw => axis.2.home-sw-in > > > > error--'net' requires at least one pin. none given > > ///////////////////////////////////////////////////// > > i do try everything- what i see in e-mail > > > > > > > > > > On Thu, Jul 17, 2014 at 9:38 AM, Ed Nisley <[email protected]> > wrote: > > > >> On 07/16/2014 04:35 PM, a k wrote: > >>> I did input > >>>>> # Read home switch inputs from I/O card. > >>> net x-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.026.in > >>> net y-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.030.in > >>> net z-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.034.in > >> > >> Did you change the *example* HOSTMOT2 and BOARD strings to match the > >> actual hardware in your system? > >> > >> This *sample* for my hardware shows the commands that dump the names: > >> > >> http://softsolder.com/2013/06/17/mesa-5i25-7i76-hal-pins/ > >> > >> I believe there's a period (.) missing before the BOARD part of the > >> identifier in what you have written. This seems more likely: > >> > >> hm2_5i25.0.gpio.032.in > >> > >> However, that's for my system, not yours, and you must modify the > >> *examples* to match your actual hardware. > >> > >> -- > >> Ed > >> softsolder.com > >> > >> > >> > ------------------------------------------------------------------------------ > >> Want fast and easy access to all the code in your enterprise? Index and > >> search up to 200,000 lines of code with a free copy of Black Duck > >> Code Sight - the same software that powers the world's largest code > >> search on Ohloh, the Black Duck Open Hub! Try it now. > >> http://p.sf.net/sfu/bds > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > > ------------------------------------------------------------------------------ > > Want fast and easy access to all the code in your enterprise? Index and > > search up to 200,000 lines of code with a free copy of Black Duck > > Code Sight - the same software that powers the world's largest code > > search on Ohloh, the Black Duck Open Hub! Try it now. > > http://p.sf.net/sfu/bds > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
