Greetings; My camera on the milling machine is having spastic spells. Dmesg says its disconnecting but I see no evidence of that as being a mechanical cable problem. None of the disconnect/reconnect sessions can be blamed on my moving the usb cable that hooks it up.
Its the only video device in the system other than the i915 on the D-525MW mainboard. And when it comes back up, it comes back up as /dev/video1, not /dev/video0 which is I believe where it started. The camera is configured to use /dev/v41, and after the failure all the by-id and by- path links in /dev/v4l are links to /dev/video1. Camview can't switch as it is configured to use v4l2:0, and goes into about 100000 lines a second of reporting the failure message. How can I make it (=camview) even mouthier so that it might spit out the real problem that caused the usb disconnect? Thanks. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
