I want one.. :-) Dave
On 7/30/2014 12:52 PM, Roland Jollivet wrote: > I gather from the first post that aram wants to integrate a 'depositor' and > a milling machine. > > Here a very fine example(laser) of that; > https://www.youtube.com/watch?v=s9IdZ2pI5dA > > > Roland > > > > > On 30 July 2014 10:37, Gregg Eshelman <[email protected]> wrote: > >> On 7/29/2014 6:40 PM, Jon Elson wrote: >> >>> Yes, and welder - that means the guy who knows welding, not >>> the machine - knows and fights warpage every day, and knows a bunch of >>> tricks to prevent or at least control it. Clamping to a rigid table >>> and stitch welding are the most common tricks. Stitch welding is to >> make a >>> number of short welds on a seam, rather than just plowing along in a >>> straight line from one end to the other. >> Weldor is the person holding the thing that gets hot. Welder is the >> thing that gets hot. ;) >> >> Same as sailer is the floating thing the sailor rides on. >> >> Somewhere around I have an old copy of the Craftsmen "Oxy-Acetylene >> Weldor's Handbook". >> >> Odd thing is a person who drives a vehicle is a driver, not a drivor. >> Perhaps because the vehicle is a car or truck or wagon instead of a >> driver. If that conveyance in your driveway (that you park on before >> taking off for a drive on the parkway) was commonly called a driver then >> you'd be a drivor upon getting in the *ahem* drivor's seat. >> >> --- >> This email is free from viruses and malware because avast! Antivirus >> protection is active. >> http://www.avast.com >> >> >> >> ------------------------------------------------------------------------------ >> Infragistics Professional >> Build stunning WinForms apps today! >> Reboot your WinForms applications with our WinForms controls. >> Build a bridge from your legacy apps to the future. >> >> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
