I imagine you can get co-ordinates from something like http://opencv.org/ and then move the nozzle/s as required
Dave Caroline On 18/08/2014, Todd Zuercher <[email protected]> wrote: > I've had a problem proposed to me. Any ideas or suggestions? > > A series of randomly sized wooden pieces (uniform thickness) placed randomly > on a slow conveyor. Each piece has 1 to 4 small pockets milled in them. I > would like to automate a method of blowing out the dust left from milling > the pockets. How hard would it be to detect the location of these pockets, > position an air nozzle over the pocket and clean them with a short air blast > as they are carried down the conveyor. > > -- > > ======================================== > > Todd Zuercher > mailto:[email protected] > > ======================================== > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
