We use cameras to check things on production lines, I'd assume from that experience you would need to traverse the conveyer and when a target is found blast some air. Is this just to save some air vs an air curtain?
JT On 8/18/2014 12:46 PM, Todd Zuercher wrote: > I've had a problem proposed to me. Any ideas or suggestions? > > A series of randomly sized wooden pieces (uniform thickness) placed randomly > on a slow conveyor. Each piece has 1 to 4 small pockets milled in them. I > would like to automate a method of blowing out the dust left from milling the > pockets. How hard would it be to detect the location of these pockets, > position an air nozzle over the pocket and clean them with a short air blast > as they are carried down the conveyor. > ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
