Am 20.08.2014 um 19:04 schrieb Karlsson & Wang <[email protected]>:
> I am trying to use Modbus to talk to a card vi TCP which I built myself. I > work as a software developer but are not familiar with the protocol, do > anyone which registers or what it is called are used for what? search for 'TOSVERT VF-S11 Communications Function Instruction Manual' which lists every bit you never were interested in;) -m > > Nicklas Karlsson > > > On Wed, 20 Aug 2014 16:13:51 +0300 > Andrew <[email protected]> wrote: > >> Hello! >> >> I'm trying to connect my Toshiba VFD to LinuxCNC >> http://linuxcnc.org/docs/html/drivers/VFS11.html >> I made the interface according to Michael's diagram. >> But there's no response from the VFD on pin 3, I checked it with my >> O-scope. Though there's a signal on pin 5 when I try to connect with >> Toshiba program. >> Should I set some parameters on the VFD to see it answering? >> >> Thanks! >> >> -- >> Andrew >> ------------------------------------------------------------------------------ >> Slashdot TV. >> Video for Nerds. Stuff that matters. >> http://tv.slashdot.org/ >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Slashdot TV. > Video for Nerds. Stuff that matters. > http://tv.slashdot.org/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
