With not tolerance for the g64 setting, Linuxcnc is going to go as fast as it can and still "touch" every line segment. So with your machines acceleration settings, what is the smallest arc radius that it can make at 400 ipm? That is how much each corner will be rounded.
----- Original Message ----- From: "Matt Shaver" <[email protected]> To: [email protected] Sent: Wednesday, August 20, 2014 10:54:27 PM Subject: [Emc-users] Possible Trajectory Problem I've experienced some behavior that might be a bug. The relevant information can be found at: http://www.mattshaver.com/gas/ Running the CAP.TAP program results in the motion depicted in Screenshot.png. Adding a G61 or G64 P0.005 to the program produces a trajectory that closely follows the expected path. Significantly slowing the feedrate also produces normal results. Is this a bug, or is it simply default G64 behavior on a machine configured as this one is? Any comments would be welcome! Thanks, Matt ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
