You'll need more than just a logic analyzer. There is a high voltage analog waveform that drives the piezo actuator in each nozzle. The shape of the pulses control how the drops and satellites are formed and ejected from the nozzles. Piezo heads are more difficult to drive than thermal inkjet heads.
Some examples are in these papers: http://www-kyg.stanford.edu/khuriyakub/opencms/Downloads/03_Percin_02.pdf http://www.dcsc.tudelft.nl/~xbombois/Amol_mems.pdf On 09/10/2014 11:05 PM, Gregg Eshelman wrote: > On 9/10/2014 3:08 AM, Viesturs Lācis wrote: >> Hello! >> >> I was asked about the machine, that basically does this: >> https://www.youtube.com/watch?v=W6tkotN95PA >> 1) how to control the Epson head? there are 8 wires going to the head; > Google "bus pirate". When you get this working, do up a website and send > the URL to Hackaday. :) > > ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
