Do you have a WEDM? Maybe a friend does? Then mount a U axis. This is the closest <http://www.google.co.za/imgres?imgurl=http%3A%2F%2Fd2n4wb9orp1vta.cloudfront.net%2Fresources%2Fimages%2Fcdn%2Fcms%2FMMS_0212_EDM_C.jpg&imgrefurl=http%3A%2F%2Fwww.mmsonline.com%2Farticles%2Fwire-edm-with-a-twist&h=375&w=500&tbnid=vtDvyyrZBtJ8EM%3A&zoom=1&docid=LsT5-rMx8qCXrM&ei=A19HVOfkAYKw7AabtoHIDw&tbm=isch&client=firefox-a&ved=0CC4QMygSMBI&iact=rc&uact=3&dur=11846&page=2&start=15&ndsp=16> pic to how I think it could be done. (ignore fact that wire if horizontal)
Surely this will give you all your correct angles. Regards Roland http://www.mmsonline.com/articles/wire-edm-with-a-twist On 21 October 2014 18:00, andy pugh <[email protected]> wrote: > On 21 October 2014 16:52, Kirk Wallace <[email protected]> > wrote: > > The attached is my next guess on how to machine the clutch with a > horizontal > > mill. The rotary axis would need to be geared with the canted Y axis. > > That would probably give a better geometry for the ramp, but I think I > would run out of headroom as my dividing head is quite tall. > I think that the arrangement I have will work OK. > > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
