On Mon, 27 Oct 2014, p...@wpnet.us wrote: > Date: Mon, 27 Oct 2014 15:57:22 -0500 > From: p...@wpnet.us > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76 > > ------Original Mail------ > From: "Peter C. Wallace" <p...@mesanet.com> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Sent: Mon, 27 Oct 2014 13:39:46 -0700 PDT > Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76 > > ... > >> The 7I76 provides one high speed encoder counter for spindle use and 2 medium >> speed encoder inputs for MPG use on field I/O pins 16,17,18 and 19. > > > Is there a document on configuring this you can point me to? It seems it's > not supported in PNCConf, and there is no reference to those inputs as MPG > inputs in the 7i76man.pdf either. Have I not found some repository with > whitepapers for configurations with the Mesa cards?
There's a brief mention on page 18 in the mode options > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
