I'll check them out as I go. -----Original Message----- From: andy pugh [mailto:bodge...@gmail.com] Sent: 06 November 2014 03:47 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Probably a documentation error
On 6 November 2014 13:32, Viesturs Lācis <viesturs.la...@gmail.com> wrote: > The starting point of arc is X0 Y0 (previous line is G0 X0 Y0). How > can it reach X10 Y16, which is 18,86 units from start point with I3 > J4, which give radius 5 and diameter 10? It can't. It seems that someone needs to run through the examples with a sim machine and see what actually happens, then edit the docs to suit. It is wrong in French too, FWIW. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ***************************************************************************** The information contained in this e-mail is confidential and may be subject to legal privilege. If you are not the intended recipient, you must not use, copy, distribute or disclose the e-mail or any part of its contents or take any action in reliance on it. If you have received this e-mail in error, please e-mail the sender by replying to this message. All reasonable precautions have been taken to ensure no viruses are present in this e-mail and the sender cannot accept responsibility for loss or damage arising from the use of this e-mail or attachments. .***************************************************************************** ***************************************************************************** The information contained in this e-mail is confidential and may be subject to legal privilege. If you are not the intended recipient, you must not use, copy, distribute or disclose the e-mail or any part of its contents or take any action in reliance on it. If you have received this e-mail in error, please e-mail the sender by replying to this message. All reasonable precautions have been taken to ensure no viruses are present in this e-mail and the sender cannot accept responsibility for loss or damage arising from the use of this e-mail or attachments. .***************************************************************************** ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
