On Tue, Nov 18, 2014 at 7:52 AM, Gene Heskett <[email protected]> wrote:
> > > > > Yikes! So, after recompiling lincurve to accept at a minimum 55 > > plotted points, I'd have to add 110 lines of setp? > > Yes. But since it does interpolate, wouldn't an every 3.5" correction do > 99% of what you need? Or do you have some real discontinuities in the > error map? Like where two shorter bars of metal come together and the > carriage bearings have to "climb over" to the next bar? > > Cheers, Gene Heskett > Gene, 3.5" is to great a distance between the points. The calculated slope of the taper varies down the entire length of the rod. There are places on my "table" that are up to .005" or more off from the median height I arbitrarily chose to get the Z delta. I'd rather not have interpolation determine the cross-sectional dimension of the taper, I'd rather have it spot on at each point, keeping the character of the taper exactly what was calculated. Mark ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
